Solutions for Optical Fiber Communication

What is the difference between indoor cable and outdoor cable? The center of the fiber optic cable is usually a core made of glass. The core is surrounded by a layer of glass envelope with lower refractive index than the core, so that the optical signal into the fiber core is reflected by the claddi

What are active (AON) and Passive (PON) optical networks?Fiber to the Home (FTTH) enables the installation of fiber from a central point directly into the end user's home, providing unprecedented high-speed Internet access. There are two types of systems for implementing FTTH network deployments: AO

(1) The tensile strength is larger than the general PVC wire: the tensile strength of the general PVC wire is greater than 1.05Kgf/mm2, and the tensile strength of the low smoke halogen free wire is greater than 1.2Kgf/mm2; (2) Good weather resistance (-30℃~105℃); (3) good softness (hardness of 8

IlluminantThe output signal of the microcomputer control system is an electrical signal, and the optical fiber system transmits an optical signal. Therefore, in order to transmit the electrical signal generated by the microcomputer system in the optical fiber, the electrical signal must first be con

When opening the network cabinet, it will be found that the integrated wiring products inside, in addition to the network cable and module, the other may not be clear, what is the distribution frame, jumper frame and line rack, what is the difference between them? What does it do? · Line handling fr

Optical cable classification and wiring knowledgeAs a high-bandwidth and high-security transmission medium, optical fiber has been widely used in major transmission networks. Due to the high cost of cables and equipment, optical fiber is mostly used only in the backbone of the network, that is, in t